Email us at
info@infernois.com
Inferno Integrated Solutions is based in Mumbai, Maharashtra, India as a trusted provider of safety and security equipment for laboratories, hotels, hospitals, warehouses, high rise buildings, etc.
The prime strength of the company lies in more than 15 years of knowledge and skills that help us providing complete protection to the people and property. We have gained huge recognition in the market with high-end resources such as a modern production unit, accomplished team of professionals and vast distribution channel. Our well-equipped storage facility helps us keeping a complete stock of safety equipment’s and other products for meeting demands of the patrons swiftly and streamlined.
Read more
We provide LPCB, Vds, CE, ISI and UL Listed Approved safety equipment and other products that help us
to
maintain the credibility in the market. We offer:
In conventional systems detectors are wired as a circuit or zone. They signal fire conditions to a control panel by changing from a high to low impedance. The panel detects this impedance change by current monitoring and identifies the zone.
The Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionization detector but has an indicator LED which is clear in quiescent state but produces a red light in alarm.
The Series 65 Heat Detector monitors temperature by using a dual thermistor network which provides a voltage output proportional to the external air temperature.
There are two types of analogue addressable system those with ‘distributed intelligence’ and those with ‘centralised intelligence’. In systems with ‘distributed intelligence’, the detectors incorporate processors which can determine whether alarm levels of smoke or heat exist and can initiate action accordingly. Detectors in systems with ‘centralised intelligence’ monitor the air around them for smoke or heat and transmit the data to the control panel on interrogation. The processor in the panel compares the values with stored values and determines whether a pre-alarm or alarm should be signalled.
The Optical Smoke Detector is suitable for slow burning or smoldering fires and should be positioned where these are most likely to occur. They can be set to a sensitivity mode best suited for the application
The Heat Detector, distinguishable by the low airflow resistant case, uses a single thermistor to sense the air temperature around the detector. This type of detector is particularly useful where the environment is dirty or smoky under normal conditions.
The Multisensor Detector comprises optical smoke and temperature sensors whose outputs are combined to report a single value to the fire control panel. With a view to improving false alarm management the smoke and heat values can also be reported separately, provided that the fire control panel is programmed with appropriate software.
The battery operated smoke alarm that utilizes ionization sensing technology. The four (4) inch unit is smaller in diameter giving it discreet design with the same quality you would expect in manufactured product. Itis powered by a 9V battery, providing continuous protection, even during power outages. This easy to install unit includes a test button to verify the detection electronics are working as intended.
Intrinsically Safe detectors feature all the benefits of the standard range, but are developed specifically for use in hazardous areas. Itis suitable for use in marine and offshore applications as well as in land-based systems and has been tested and approved to meet the requirements of the ATEX directive.
This types of detector is for specialist applications including Duct Detectors, Flame Detectors and Beam Detectors. These are all designed for very specific circumstances covering commercial heating and ventilation ducts, dirtier environments where flaming fires may be expected and protection of large open spaces.
The Duct Smoke Detector provides early detection of smoke in theair moving through heating and ventilation (HVAC) ducts in commercial and industrial premises. Its purpose is to prevent the recirculation of smoke from an area on fire to areas unaffected by the fire. Duct smoke detector is designed to accept a conventional detector head and an analogue addressable detector head. It operates in air speeds of 0.5m/s to 20m/s.
Flame detectors are effective in protecting areas where flaming fires may be expected.
There is a choice of detection techniques –ultraviolet (UV),infra-red (IR) or a combination
of both.
UV flame detectors are generally used in engine rooms, factories and warehouse applications.
IR flame detectors are able to tolerate dirtier environments which may block UV radiation
and are generally used in applications such as waste handling, color printing and
paper manufacturing.
Beam Detectors offer a cost effective solution for protecting large open spaces. One single unit installed on a wall candetect smoke over an area up to 1500m2 (BS5832), which Is beyond that of traditional point detectors. Beams are therefore ideal for protecting areas such as warehouses,theatres and sports centers
The Multi-Tone Open-Area Sounder is designed for use in open areas and can be connected to any system. The Intelligent Open-Area Visual Indicator has been developed for use in situations where there is a risk that sounders will not be heard.
Testing equipment must be proven to be safe for the engineer and the system, it needs to be cost-effective, versatile, portable, approved by all detector manufacturers and in compliance with international codes and standards. The core element of the Solo range is the telescopic and extension access poles which are extremely lightweight and quickly extend to provide access to detectors up to 9 meters.
Standard interfaces are fitted with bi-directional short-circuit isolators so that they are unaffected by a single short-circuiton either loop input or output. The exception to this is the Mains Input/Output Unit which is not isolated
Manual Call Pointhas a highly visible alarm indicator which can be seen from up to 10 Meters away. The Manual Call Point interrupts the polling cycle for a fast response, when activated. A Combined LED indicator and front reset mechanism allows for a quickand simple reset
It is an analogue addressable fire detection and alarm control panel with either no zonal LEDs or 16 zonal LED indicators and is available in models with either 1 or 2 detection loops. It can support 126 devices protocol to 240 devices of protocol per loop. It has also supports loop-powered sounders, call points and I/O modules for all three of the aforementioned protocols. Any number of devices can be allocated to any zone ensuring that any system configuration can be easily accommodated. To ensure that the system is installed and commissioned with the minimum of trouble, it should be carefully planned before the installation is begun.
This involves allocating an address to each device and allocating a message of up to 40 characters (including spaces) to each address to assist in the location of the devices. Devices should then be grouped into zones in accordance with the appropriate fire detection systems design standard and building plans.The control panel can be configured using the switches on the front as described in the menu descriptions at the back of this manualor more comprehensively, using the Loop Explorer PC configuration utility and download lead which is available as a separate item.The control panel offers an extensive list of features and options for the control and monitoring of plant, equipment and sounders, which can be, configured via the Loop Explorer PC configuration programmer or the front panel controls.
It is a right blend of affordable design and quality with latest technology for fire alarm control panels. This microprocessor based conventional Fire Alarm Control panel, is designed to be used for small size commercial buildings and small scale industries. It has auser friendly standalone zones controlpanel, with optional zone wise Sounder/Contact respectively.
A conventional fire alarm control panel employs one or more circuits, connected to initiating devices (usually smoke detectors, heat detectors, duct detectors, manual pull stations, and sometimes flame detectors) wired in parallel. These sensors are devised to dramatically decrease the circuit resistance when the environmental influence on any sensor exceeds a predetermined threshold. In a conventional fire alarm system, the information density is limited to the number of such circuits used. To facilitate location and control of fire within a building, the structure is sub divided into definite areas or zones. Floors of a multistory building are one type of zone boundary.
Closed-circuit television (CCTV), also known as video surveillance,[1][2] is the use of video cameras to transmit a signal to a specific place, on a limited set of monitors. It differs from broadcast television in that the signal is not openly transmitted, though it may employ point-to-point (P2P), point-to-multipoint (P2MP), or mesh wired or wireless links. Though almost all video cameras fit this definition, the term is most often applied to those used for surveillance in areas that require additional security or ongoing monitoring
Surveillance is the monitoring of behavior, activities, or information to influence, manage or direct. This includes observation from a distance by means of electronic equipment, such as closed-circuit television (CCTV). It can feature AI function with real-time face detection
In the fields of physical security and information security, access control is theselective restriction of access to a place or other resource while accessmanagement describes the process. The act of accessing may mean consuming,entering, or using. Permission to access a resource is called authorization.
Access control is a fundamental component of data security that dictates who's allowed to access and use company information and resources. Through authentication and authorization, access control policies make sure users are who they say they are and that they have appropriate access to company data.
Video door-phone (also known as video door entry or video intercom) is a stand-alone intercom system used to manage calls made at the entrance to a building (residential complex, detached family home, workplace, etc.) with access controlled by audiovisual communication between the inside and outside
Video Door Phones are intercom systems that are used to make calls from the entrance of a building so as to communicate with visitors without any physical interaction and engage with them only if you wish to. Video Door Phones not only increase home security, when integrated with the home automation system but also are of great convenience. If the Video Door Phones have a remote control it makes moving around convenient.
Video Door Phone’s are usually integrated with Access Control Systems. This is to allow access to certain authorized users with the help of cards, finger print sensors, keypad for pin numbers and Bluetooth. Video Door Phones should be potential enough to integrate with all the systems including-Access Control systems, Home Automation systems, Alarm systems etc
Fire hydrant system is a safety measure or emergency equipment required in buildings that comprises a series of components that when assembled together provide a source of water to assist fire. The system consists of the following components: Water Supply & Storage Facility. Pipework & Valves. Fire Brigade Booster Inlets. A fire hydrant or firecock (archaic) is a connection point by which firefighters can tap into a water supply. It is a component of active fire protection. A fire hydrant is an active fire protection measure, and a source of water provided in most urban, suburban and rural areas with municipal water service to enable fire fighters to tap into the municipal water supply to assist in extinguishing a fire
Sprinkler irrigation is a method of applying irrigation water which is similar to natural rainfall. Water is distributed through a system of pipes usually by pumping. It is then sprayed into the air through sprinklers so that it breaks up into small water drops which fall to the ground. A system for protecting a building against fire by means of overhead pipes which convey an extinguishing fluid (such as water) to heat-activated outlets. Sprinkler heads are equipped with a glass trigger filled with a glycerin-based liquid that expands with temperature. As the liquid expands, it breaks the glass and activated the sprinkler head. These sprinkler heads are attached to a reliable system of water pipes that are typically built into the walls or ceiling
A fire extinguisher is an active fire protection device used to extinguish or control small fires, often in emergency situations. It is not intended for use on an out-of-control fire, such as one which has reached the ceiling, endangers the user (i.e., no escape route, smoke, explosion hazard, etc.), or otherwise requires the expertise of a fire brigade. Typically, a fire extinguisher consists of a hand-held cylindrical pressure vessel containing an agent that can be discharged to extinguish a fire. Fire extinguishers manufactured with non-cylindrical pressure vessels also exist but are less common.
There are two main types of fire extinguishers: stored-pressure and cartridge-operated. In stored pressure units, the expellant is stored in the same chamber as the firefighting agent itself. Depending on the agent used, different propellants are used. With dry chemical extinguishers, nitrogen is typically used; water and foam extinguishers typically use air. Stored pressure fire extinguishers are the most common type. Cartridge-operated extinguishers contain the expellant gas in a separate cartridge that is punctured prior to discharge, exposing the propellant to the extinguishing agent.
A public address system (PA system) is an electronic system comprising microphones, amplifiers, loudspeakers, and related equipment. It increases the apparent volume (loudness) of a human voice, musical instrument, or other acoustic sound source or recorded sound or music. PA systems are used in any public venue that requires that an announcer, performer, etc. be sufficiently audible at a distance or over a large area. Typical applications include sports stadiums, public transportation vehicles and facilities, and live or recorded music venues and events. A PA system may include multiple microphones or other sound sources, a mixing console to combine and modify multiple sources, and multiple amplifiers and loudspeakers for louder volume or wider distribution.
We also provide
Installation, Commissioning, Testing and
Annual Maintenance Services for all Systems.
G-1 Shree Shiv Darshan, CHS Samarth Nagar Majaswadi, Jogeshwari (E), Mumbai - 400 060
Security and safety have become the supreme concern in every sector be it education, hospitality, businesses, or even personal spaces. To ensure complete safety of the valuable assets, property and human life against burglary, fire, and other hazards, one must use fool-proof safety equipment.
nferno Integrated Solutions brings forth innovative safety and security systems to take the safety of people and property to a new level with enhanced protection. The company provides the most advanced line of smart and efficient Addressable & Conventional Fire Alarm Control System, Closed Circuit Television (CCTV) System, Biometric Access Control System, Video Door Phone System, Fire Hydrant Systems, Sprinklers Systems, Fire Extinguisher System and Public Address System
Inferno Integrated Solutions was established in the year 1985 to provide industry-specific & need-based safety & security solutions with the support of up-to-date technology as trusted Installer, Trader, Wholesaler supplier of reliable safety equipment and other accessories for laboratories, warehouses, hotels, hospitals, high rise buildings and other industrial premises.
Starting from a modest beginning, we have outgrown ourselves exponentially, reaching a new height with each passing year. By maintaining the highest standard of quality and services even in the tough times, we have proudly grown 80% over the last 3 years and are still aiming to hit new milestones.
With more than 25 years of experience, we successfully execute small and large projects from designing, supplying, maintenance, commissioning and programming to testing of fire alarm control systems, CCTV systems, etc. We carry out survey as well as recommend the bill of quantities of Fire Alarm Systems and other products required in a said premise. Today, we enjoy a great reputation in the market by winning the trust of:
